When the rain becomes an acid test

You can be sure of one thing in spring: rain. In the time period before Easter there can be rainfall of 40 to 60 litres per square metre. We would like to explain why this can become an acid test for your pond and possibly also a problem for your fish.

There are a lot of different minerals dissolved in your pond water. These are consumed by biological processes (e.g. nitrification) by your fish (e.g. mineral consumption), the plants (e.g. biogenic decalcification) and algae (mineral consumption). Frequent and heavy rain, which is softened pure water (KH = 0), leads to a dilution effect. This causes the KH in your pond to sink steadily.

A significant amount of the minerals responsible for the stability of the water can be measured with the carbonate hardness (KH). The KH stabilises the pH value and ensures that this is subject to only slight fluctuations.

Why is this important? The fish in the garden pond’s mucous membrane tolerates a pH value between 7.5 and 8.5. If this starts to fluctuate, and in extreme cases this can be by about 4.0 in 24 hours to over pH 10.0, the fish is exposed to stress and the mucous membranes can become severely irritated. You know this effect when biting into a lemon. To avoid these fluctuations and to protect the fish, a carbonate hardness of 4 ° dKH and higher has been proven to be good. With this value the pH level stabilises within the range mentioned above.

How to test the KH in your pond

With a simple colour change test you can determine the stability of your pond water in less than one minute. On the left of your colour chart you can see whether the carbonate hardness is available in sufficient amounts (blue colour indication) and on the right hand side you can interpret the measurement results you have obtained for the pH value, following the traffic light colour scheme of red/yellow/green. You don’t need to be a biologist or a chemist to do that!

So test your pond water every 2-3 weeks, every week in frequent rainfall, with the JBL PROAQUATEST POND Check pH/KH .

What to do, when the KH is lower than 4 °dKH?

Have you discovered that the carbonate hardness is lower than 4 °dKH or that the pH level is outside the normal range? Then you could carry out a big water change (min. 50%), but this is scarcely possible or affordable with a pond. It is quicker and more reliable to add the missing minerals by JBL StabiloPond Basis , especially to raise the KH and thus to stabilise the pH level again.

Can you also add JBL StabiloPond KH for this purpose? In principle this is possible. But we have modified the product specifically for use when pretreating the water the evening before an algae treatment, especially to raise the KH.

© 05.03.2016
Matthias Wiesensee
Matthias Wiesensee
M.Sc. Wirtschaftsinformatik

Social Media, Online Marketing, Homepage, Kundenservice, Problemlöser, Fotografie, Blogger, Tauchen, Inlineskating, Aquaristik, Gartenteich, Reisen, Technik, Elektronische Musik

Quién soy: Seit Teenagerzeiten mit Aquarien in Kontakt. Klassische Fischaquarien, reine Pflanzenaquarien bis hin zum Aquascape. Aber auch ein Gartenteich und Riffaquarien begleiten mich privat im Hobby. Als Wirtschaftsinformatiker, M.Sc. bin ich als Online Marketing Manager bei JBL für die Bereiche Social Media, Webentwicklung und der Kommunikation mit dem Anwender der JBL Produkte zuständig und kenne die JBL Produkte im Detail.

Comentarios

Notas y consentimiento sobre las cookies y contenidos de terceros

Empleamos cookies/herramientas técnicamente necesarias para ofrecer, operar y asegurar este servicio. Además, empleamos con tu consentimiento expreso cookies/herramientas de marketing, de seguimiento, para crear contenidos personalizados en páginas de terceros así como para mostrar contenidos de terceros en nuestro sitio web. Puedes revocar tu consentimiento en todo momento con carácter futuro a través de la opción de menú «Configuración de cookies».
Pinchando en «Permitir todas» nos otorgas el consentimiento expreso para utilizar cookies/herramientas para mejorar la calidad y las prestaciones de nuestro servicio, para optimizar el rendimiento de forma funcional y personalizada, para medir la efectividad de nuestros anuncios o campañas y para mostrar contenidos personalizados con fines de marketing incluso fuera de nuestro sitio web. Esto nos permite mostrar anuncios en línea personalizados y disponer de opciones ampliadas para analizar tu comportamiento como usuario. Esto implica también acceder y almacenar datos en tu dispositivo. Puedes revocar tu consentimiento en todo momento con carácter futuro a través de la opción de menú «Configuración de cookies».
El botón «Cambiar configuración» te permite otorgar y revocar consentimientos por separado sobre las cookies/herramientas y recibir información detallada sobre dichas cookies/herramientas que empleamos, sus fines y duraciones.
Pinchando en «Solo las esenciales» se emplearán únicamente las cookies/herramientas técnicamente imprescindibles.

En nuestra política de privacidad obtendrá información de cómo tratamos sus datos personales y la finalidad de dicho tratamiento de datos.

Notificaciones PUSH (emergentes) de JBL

¿Qué son las notificaciones PUSH? Como parte del estándar W3C, las notificaciones de escritorio definen una API para las notificaciones destinadas a los usuarios finales, que serán enviadas por medio de notificaciones al navegador del equipo de sobremesa y/o dispositivo móvil del usuario. Las notificaciones aparecen en los terminales de la forma que el usuario final conoce por las app instaladas en el dispositivo (p. ej., correos electrónicos). Las notificaciones aparecen en los terminales de la forma que el usuario final conoce por las app instaladas en el dispositivo (p. ej., correos electrónicos).

Estas notificaciones permiten al propietario de una página web ponerse en contacto con sus usuarios siempre que estos tengan un navegador abierto, independientemente de si el usuario está visitando la página web en ese momento o no.

Para poder enviar notificaciones de escritorio solo se necesita una página web con un código web push instalado. Así, las marcas que no tengan app también pueden beneficiarse de las muchas ventajas que ofrecen las notificaciones emergentes (también denominadas push, comunicaciones personalizadas en tiempo real justo en el momento adecuado).

Las notificaciones de escritorio son parte del estándar W3C y definen una API para las notificaciones destinadas a los usuarios finales. Una notificación permite notificar al usuario sobre un suceso como, p. ej., un artículo nuevo en un blog, fuera del contexto de una página web.

JBL GmbH & Co. KG ofrece este servicio de forma gratuita, el cual puede activarse tan fácilmente como se puede desactivar.