Pond care in summer - checklist and tips for algae-free fun

Each season is characterised by its typical elements and factors. In summer, you would expect heat and light rather than rain. 

Wenn wir in diesem Jahr jedoch aus dem Fenster blicken, stellt sich die beliebte Jahreszeit etwas anders dar. Stark schwankende Temperaturen von über 38° C am Tag bis unter 10° C in der Nacht. Statt großer Trockenheit, sind Stürme, Gewitter und starke Regenfälle ein fester Bestandteil geworden. Für den umliegenden Garten mit Rasenflächen und Beeten ein Traum. Die Natur profitiert von dem Mehr an Wasser, allerdings hat dies auch einen Einfluss auf unseren Teich. Welche Pflegemaßnahmen klassischer Weise notwendig sind, haben wir Ihnen bereits in der Themenwelt Teich für jede einzelne Jahreszeit zusammengestellt: Manutenzione stagionale .

In this post, we would like to focus on the current situation, paying particular attention to the spring and autumn influences, which also play their part.

General monitoring measures

Whatever the weather, there are a few things to remember. A bit of extra work and a tiny investment of time means you’ll reap the rewards of clear water and healthy fish.

  1. The water values: Check the values pH + KH and the oxygen content every 7 days. There can be problems if the stability of the pond is not maintained. Check the nutrients and the nitrogen cycle with NH4 + NO2 and NO3 + PO4 + Fe every 14 days.
  2. Plants: The underwater and above-water plants are growing, so cut back and thin out any heavy overgrowth.
  3. Plant debris: Remove dead plant debris and creatures entering the pond, such as pollen and insects, from the water surface several times a week.
  4. Fish: Observe your fish for a few minutes every day. This way you can detect changes and injuries at an early stage.
  5. Feeding: High activity means high energy demand. Feed several times a day.
  6. Technology check: Check the technical equipment installed is working and prevent problems arising from technical failure or heavy contamination.

Below we’ll address specific situations and problems requiring your action and attention.

The rain - a lot of water is a problem

Instead of having to refill water regularly, periods of heavy rainfall mean the pond is full to the brim. You might now think everything is fine.

However, rainwater is "hardness-free" and contains no minerals. Thus, the minerals and hardness components in the pond water, which provide the necessary stability of the pH value and healthy growth of your fish, are also diluted.

After long and frequent rainfalls, you can check the pH and KH values with the JBL PROAQUATEST POND Check pH/KH . The pH value should be between 7.5 and 8.5 and the KH at least above 4° dKH, preferably above 6° dKH.

If this is not the case, you can add minerals with JBL StabiloPond Basis and restore the necessary stability. If you don’t do this basic work, strong algae growth and a sudden drop in acidity will endanger the appearance of the pond and the health of your fish.

You can read more about this in the other dedicated myJBL blog posts:

Heavy rain – watch your water values

Sudden drop in acidity: danger lurks in your pond after heavy rainfalls

Heavy Rainfalls Are Stressful For Your Fish

Rain – A problem for fish and good for algae

Thunderstorms and heavy storms

Thunder, lightning and strong winds characterise a strong summer thunderstorm. They are not without danger for our ponds either. The temperature drops rapidly, the wind blows a lot of foreign bodies into the pond and the rain dilutes the minerals. In extreme and long-lasting situations, the intense and rapid change can lead to the bacteria being weakened. Here we recommend you strengthen them with  JBL FilterStart Pond e JBL BactoPond .

Nutrients and algae formation

Pollen drift, strong winds and rain mean that leaves, insects and other organic matter are carried into the pond from the surrounding area. The nutrients they contain dissolve in the water and are an ideal food base for thread algae, floating algae and other forms. The waste products of our fish and dying plant parts also decompose and can be found as sludge at the bottom of the pond. This is a real nutrient bomb that can be stimulated to decompose with products such as  JBL AlgoPond Sorb , but if the amount is too great, it can only be removed by siphoning it off and thus removing it. This also causes the nutrients contained in it to disappear, depriving the algae of them.

Intensive pond planting prevents algae. The plants consume the excess nutrients and grow magnificently, so don’t skimp on the planting.

Another way to remove the nutrients dissolved in the water is to use JBL PhosEx Pond Direct for direct binding and   JBL PhosEX Pond Filter filter medium for ongoing removal. For large amounts, a water change can also help as it dilutes the nutrients.

You can read more about this in the other dedicated myJBL blog posts and the Themeworld:

Your pond’s health in summer

The Water Change In Ponds Is Important!

Problemi con le alghe

Phosphate: The cause of tomorrow’s algae is in your pond now.

Heat and oxygen content

The heatwave may want us to head for the waters, but it’s a problem for our fish. The oxygen saturation is dropping, the fish’s metabolism is working overtime and this can lead to a problem if they are fed heavily. It’s better not to feed when the temperature is above 30 °C. If the oxygen content drops too much, the beneficial filter bacteria will also be lacking oxygen, so that an increase in nitrite (NO2) and ammonium (NH4) can occur if there is heavy contamination in the filter and mud on the ground. That’s why the filter needs a quick clean to siphon off the excess sludge when it becomes heavily contaminated.

The heat also causes another problem: evaporation. The water level drops and the water has to be refilled. Here it is important not to use rainwater or well water. You can find more details about this in the following posts: 

Ossigeno e temperatura

Refilling water into the pond – but not like this!

My pond is losing water - where has it gone?

Do your plants a favour and add  JBL FloraPond to the root area every 3 - 6 months to ensure healthy and stable growth.

© 18.07.2021
Matthias Wiesensee
Matthias Wiesensee
M.Sc. Wirtschaftsinformatik

Social Media, Online Marketing, Homepage, Kundenservice, Problemlöser, Fotografie, Blogger, Tauchen, Inlineskating, Aquaristik, Gartenteich, Reisen, Technik, Elektronische Musik

Su di me: Seit Teenagerzeiten mit Aquarien in Kontakt. Klassische Fischaquarien, reine Pflanzenaquarien bis hin zum Aquascape. Aber auch ein Gartenteich und Riffaquarien begleiten mich privat im Hobby. Als Wirtschaftsinformatiker, M.Sc. bin ich als Online Marketing Manager bei JBL für die Bereiche Social Media, Webentwicklung und der Kommunikation mit dem Anwender der JBL Produkte zuständig und kenne die JBL Produkte im Detail.


Cookie, qualche informazione e poi continua la navigazione

Anche il sito di JBL utilizza diversi tipi di cookie per poterti offrire una funzionalità completa e molti servizi. I cookie tecnici e funzionali sono strettamente necessari al funzionamento di questo sito. Inoltre utilizziamo i cookie per il marketing. Questo ci permette di riconoscerti alla tua prossima visita sul nostro vasto sito, di misurare il successo delle nostre campagne pubblicitarie e, tramite i cookie di personalizzazione, di rivolgerci a te individualmente e in modo diretto adattandoci ai tuoi bisogni, anche al di fuori del nostro sito web. Puoi decidere quali cookie accettare e quali rifiutare (per maggiori informazioni vedi "Modificare le impostazioni") in qualunque momento – anche in un momento successivo.

Anche il sito JBL utilizza diversi tipi di cookie per poterti offrire una piena funzionalità e molti servizi: i cookie tecnici e funzionali sono necessari per permetterti una comoda visita del nostro sito. Inoltre utilizziamo i cookie per ragioni di marketing. Puoi decidere in qualsiasi momento – ora o più tardi – quali cookie accettare e quali no (vedi di più sotto "Modificare impostazioni").

Nella nostra informativa privacy verrai a sapere come elaboriamo i dati personali e per quali scopi impieghiamo l'elaborazione dei dati. verrai a sapere come elaboriamo i dati personali e per quali scopi impieghiamo l'elaborazione dei dati. Ti preghiamo di confermare con "Accetto" l'utilizzo di tutti i cookie.

Hai più di 16 anni? Allora conferma l'utilizzo di tutti i cookie con "Ho preso atto" – e potrai continuare la navigazione.

Seleziona le tue impostazioni cookie

Cookie tecnici e funzionali, per fare in modo che tutto funzioni al meglio quando visiti il nostro sito.
Cookie di marketing, per riconoscerti sulle nostre pagine web e per poter misurare il successo delle nostre campagne pubblicitarie.

Notifiche push di JBL

Cosa sono le notifiche PUSH? In quanto parte dello standard W3C le notifiche web definiscono un'API per le notifiche rivolte agli utenti finali, che vengono trasmesse tramite browser ai dispositivi desktop e/o mobili degli utenti. Sui dispositivi finali appaiono notifiche come le conosce l'utente finale dalle applicazioni istallate sul dispositivo (ad es. email). Sui dispositivi appaiono le notifiche come le conosce l'utente finale dalle applicazioni installate sul dispositivo (ad es. email).

Queste notifiche permettono al gestore delle pagine web di contattare i suoi utenti mentre hanno ancora aperto un browser – indipendentemente dal fatto se l'utente sta visitando il sito web o no.

Per poter inviare notifiche push si ha bisogno soltanto di un sito web con un codice web push installato. In questo modo anche marchi senza applicazioni possono usufruire di molti vantaggi delle notifiche push (comunicazioni personalizzate in tempo reale, proprio nel momento giusto).

Le notifiche web fanno parte dello standard W3C e definiscono un'API per le notifiche all'utente. Una notifica permette di informare l'utente su un fatto, come ad es. un nuovo commento sul blog, al di fuori dal contesto di una pagina web.

Questo servizio viene offerto gratuitamente da JBL GmbH & Co. KG ed è tanto facile da attivare come da disattivare.