Pond cleaning and maintenance

Leaves, mud and rain – what now?

ANY pond which is not roofed-over will build up sludge from leaves, aquatic plant leaves and other matter entering with the air (keyword particulate matter). Natural ponds and small lakes have the same problem and silt up more and more – a process, which can possibly take years to several centuries and cannot be prevented. In other words, this means that any non-draining pool, pond or lake has a limited lifetime. But this is exactly what you don't need in your garden pond. To prevent this from happening you need to take steps.

Leaves turn to sludge

A mechanical removal of leaves from trees and plants is a big help! But do something for your pond under the water surface too: the sinking leaves can form a thick layer on the bottom and slowly get broken down by bacteria, which uses up oxygen. JBL SediEx Pond has been designed to promote and accelerate the removal of sludge. It consists of two components: Firstly of highly active cleansing bacteria which decompose organic matter, and secondly of active oxygen which makes this decomposition possible in the first place. Add these two components to the sludge layer inside your pond. The added oxygen will make the bacteria slowly break down your sludge. Unfortunately the bacteria and the oxygen are not enough for thicker sludge layers. There you will need to resort to mechanical means and remove the sludge with a rake or a shovel. A lot of pond owners are completely caught by surprise that from the initial depth of180 cm only 80 cm of free water is left!!! Then there is only one thing for it: cleaning the complete pond right down to the bottom. If you want to avoid this we highly recommend you remove the sludge little by little, since this stresses your pond less than in ONE violent action.

When algae die off

If you have used the anti-algae agent of your choice and the algae have died off, these algae start to release the nutrients they have bound into your pond water. That’s just the right moment for a partial water change, ideally carried out with a pond sludge remover! If you haven’t got one and don’t want to buy one, ask your specialist shop for a loan tool!

Partial water change

You don’t normally need to change any water in your pond. The rain refills it or you use tap water during dry seasons to top it up. This is not ideal because rainwater gradually softens your water, making it low on minerals, but this is the reality.

Refilling evaporated pond water is not without its pitfalls: only pure water (which means H2O) evaporates from your pond, the minerals remain there and your water becomes richer in minerals (harder). If you then regularly refill tap or well water with a hardness of X, this hardness increases the previous hardness of the pond water. Neither fish nor plants like too hard water. It is therefore more useful to change part of the water instead of always refilling it.

Partial water change to combat discolourations

Has your pond water turned brown or yellow? With a partial water change you “dilute” the substances which cause water discolouration, your pond becomes crystal clear again and after 3-5 partial water changes no longer shows any colouration. Ideally you should carry out the partial water change with a sludge remover. If you haven’t got one and don’t want to buy one, ask your specialist shop for a loan tool!

Here’s how to carry out a partial water change

Drain the water out of your pond with the help of a submersible pump. Use this water with its many useful nutrients for your garden plants! Ideally connect a sludge remover during the suction procedure. But spread the pond sludge over your beds and under your garden plants and not over your lawn, to avoid the impression of a dug up garden. It’s the best you can do for your shrubs and other plants!

Drain out water until the water level has gone down about 15 cm and refill with tab or (suitable) well water. Treat the new water with the JBL BiotoPond water conditioner to neutralise harmful substances, such as heavy metal. Dose the water conditioner according to the amount of pond water you have changed.

Partial water change to counteract heat

Especially in shallow ponds, long hot periods can result in water temperatures above 30 °C. Then it’s time to take action, preferably in advance. Shading the pond with water lilies and their numerous floating leaves helps to avert a further increase in water temperature. A partial water change with significantly cooler tap or well water will also help. This step allows you to reduce the water temperature below the critical 30 ° limit simply and immediately.

Cookies, krótka informacja, potem będziemy kontynuować

Także strona internetowa JBL korzysta z kilku rodzajów Cookies, aby zapewnić Państwu pełną funkcjonalność i wiele usług: techniczne i funkcjonalne Cookies potrzebujemy bezwzględnie, żeby wszystko udało się podczas Państwa wizyty na tej stronie internetowej. Dodatkowo używamy Cookies do marketingu. I tak jest zapewnione, że podczas ponownej Państwa wizyty na naszej obszernej stronie rozpoznamy Państwa, będziemy mogli zmierzyć sukces naszych kampanii, oraz na podstawie spersonalizowanych Cookies będziemy mogli zwracać się do Państwa indywidualnie i bezpośrednio, w sposób dopasowany do Państwa potrzeb – także poza naszą stroną internetową. Mogą Państwo w każdej chwili – także w późniejszym terminie – określić, jakie Cookies Państwo dopuszczają a jakie nie (więcej na ten temat w „Zmiana ustawień“).

Także strona internetowa JBL korzysta z kilku rodzajów Cookies, aby zapewnić Państwu pełną funkcjonalność i wiele usług: Techniczne i funkcjonalne Cookies są potrzebne nam bezwzględnie, żeby wszystko udało się podczas Państwa wizyty na tej stronie internetowej. Dodatkowo używamy Cookies do marketingu. Mogą Państwo w każdej chwili – także w późniejszym terminie – określić, jakie Cookies Państwo dopuszczają a jakie nie (więcej na ten temat w „Zmiana ustawień“).

W naszej strefie Polityka prywatności dowiedzą się Państwo, jak przetwarzamy dane osobowe i do jakich celów wykorzystujemy przetwarzanie danych. dowiedzą się Państwo, jak przetwarzamy dane osobowe i do jakich celów wykorzystujemy przetwarzanie danych. Proszę potwierdzić za pomocą „Zapoznałam/-em się“ korzystanie ze wszystkich Cookies– i już można iść dalej.

Wiek ponad 16 lat? Proszę więc potwierdzić „Zapoznałem/am się“ odnośnie korzystania ze wszystkich Cookies– i już idziemy dalej.

Proszę wybrać swoje ustawienia Cookie

Techniczne i funkcjonalne Cookie, żeby wszystko udało się podczas Państwa wizyty na naszej stronie internetowej.
Marketingowe Cookies, abyśmy mogli rozpoznać Państwa na naszych stronach i zmierzyć sukces naszych kampanii.

Wiadomości PUSH od JBL

Jako część standardu W3C, powiadomienia Web definiują API dla powiadomień użytkowników końcowych, które są wysyłane za pośrednictwem przeglądarki na pulpit urządzeń stacjonarnych i/lub urządzeń mobilnych użytkowników. Powiadomienia pojawiają się na urządzeniach końcowych tak, jak jest to znane użytkownikowi końcowemu z aplikacji zainstalowanych na urządzeniu (np. wiadomości e-mail).

Powiadomienia te umożliwiają operatorowi witryny kontaktowanie się z jego użytkownikami tak długo, jak długo mają oni otwartą przeglądarkę - niezależnie od tego, czy użytkownik aktualnie odwiedza stronę internetową, czy nie.

Aby móc wysyłać powiadomienia web push, wystarczy tylko strona internetowa z zainstalowanym kodem web push. Tym samym także marki bez aplikacji mogą korzystać z wielu zalet powiadomień push (spersonalizowana komunikacja w czasie rzeczywistym dokładnie w odpowiednim momencie.)

Powiadomienia internetowe są częścią standardu W3C i definiują API dla powiadomień użytkowników końcowych. Powiadomienie umożliwia poinformowanie użytkownika poza kontekstem strony internetowej o wydarzeniu, jak na przykład nowy wpis na blogu.

Usługa ta jest udostępniona bezpłatnie przez firmę JBL GmbH & Co. KG, i można ją równie łatwo aktywować jak i dezaktywować.