Czyszczenie

Aquarium cleaning – much less work than you think

It is a widespread belief that it’s necessary to tip the aquarium upside down regularly and to boil the gravel. This is complete nonsense!

Every now and then you need to clean your aquarium panes. During each partial water change the dirt needs to be removed from the substrate and every 4-8 weeks a filter cleaning is due – that’s it!

Cleaning of the panes

Each aquarium works differently, but after about one week a light algae coating forms on the glass panes which you can quickly and easily remove with a JBL glass cleaner. With the JBL FLOATY II you won’t even get your arms wet and you can comfortably and efficiently clean the panes from outside within a few minutes. Caution: always take care when cleaning the pane that no tiny stone (sand or gravel) gets between the glass cleaner and the aquarium pane. Sand and gravel scratch your panes!

Some types of algae are so stubborn that they are hard to remove with normal pane magnets. For such cases, there is the JBL FLOATY BLADE with a blade. You will be surprised how quickly and easily you can remove ALL types of algae with it!

Cleaning the aquarium pane

Cleaning aquarium panes correctly and without scratches: We demonstrate how the incorrect cleaning of aquarium panes leads to scratches and how you can avoid it. How do you clean curved panes? How do you avoid damaging the silicone bonding? Why should household cleaners not be used? We talk about and demonstrate all the types of pane cleaners for your aquarium

Cleaning the cover pane

In the course of time limestone deposits on the cover pane and reduces the intensity of the lighting which reaches the aquarium water. You can easily remove the lime residue with an acidic cleaning agent. Please make sure that no cleaner residues reach your aquarium water. JBL has a special, non-toxic glass cleaner in its range: JBL PROCLEAN AQUA .

Household cleaners for limescale removal, of course, also remove limescale deposits on aquarium glass panes or aquarium technology, but: If only the smallest amounts of household cleaner get into your aquarium water, this can lead to the death of ALL your aquarium inhabitants! Always use a limescale cleaner especially developed for aquariums. Here too make sure this cleaner doesn’t enter the aquarium. But even if it does nothing will happen to the aquarium inhabitants.

Partial water change

The most important care measure is the partial water change, which should be carried out together with the substrate cleaning. Siphon about 1/3 of the aquarium water with a hose. Please connect the hose with a gravel cleaner, instead of just sucking off clear water (suitable products you can find here: Czyszczenie podłoża ). Go with its suction piece gradually through the aquarium ground and siphon the debris off (similar to a vacuum cleaner). Subsequently the sucked off water needs to be replaced by tap water and with the water conditioner JBL Biotopol you can remove the heavy metals and neutralise any chlorine contained in the water.

You can find out more about this topic here Wymiana wody .

NEVER carry out the partial water change on the same day as the filter clean! Put together the measures constitute too strong an intervention in the biology of your aquarium.

If you have added a long-term substrate fertiliser such as JBL PROFLORA AQUABASIS underneath your actual substrate, you will have to work a little more carefully with the suction cup of your substrate cleaner and not "push" all the way through to the bottom disc. In this case, only siphon off the top centimetres of the substrate without reaching the substrate fertiliser layer.

Czyszczenie filtra

Internal filters need to be cleaned every two weeks. Since external filters have a larger volume their cleaning interval may be longer. Filter cleaning of external filters: Depending on the dirt accumulation the complete filter or maybe only the pre-filter (as in the Filtry zewnętrzne range) needs to be cleaned under running water. Please inoculate the filter again with filter bacteria ( JBL FilterStart ) after cleaning.

NEVER carry out the filter cleaning on the same day as the partial water change, as this would be too much of an intervention in the biology of your aquarium.

JBL FilterStart or JBL Denitrol - what is the difference?

You can use both products to reactivate your filter material. JBL FilterStart was designed for one small bottle to be sufficient for three litres of filter volume. For this purpose, the bacteria concentration in JBL FilterStart has been increased slightly. If you take JBL Denitrol , you simply need approx. 1/3 more than from JBL FilterStart.

Hinweise und Einwilligung zu Cookies & Drittinhalten

Wir verwenden technisch notwendige Cookies/Tools um diesen Dienst anzubieten, zu betreiben und abzusichern. Des Weiteren verwenden wir mit Deiner ausdrücklichen Einwilligung Cookies/Tools zum Marketing, Tracking, Erstellen personalisierter Inhalte auf Drittseiten sowie zur Darstellung von Drittinhalten auf unserer Webseite. Eine von Dir erteilte Einwilligung, kannst Du jederzeit mit Wirkung für die Zukunft über den Menüpunkt „Cookie-Einstellungen“ widerrufen.
Mit dem Klick auf „Alle erlauben“ erteilst Du uns die ausdrückliche Einwilligung zur Verwendung von Cookies/Tools um die Qualität und Performance unseres Dienstes zu verbessern, zur funktionalen und personalisierten Leistungsoptimierung, die Effektivität unserer Anzeigen oder Kampagnen zu messen, für personalisierte Inhalte zu Marketingzwecken, auch außerhalb unserer Webseite. Dies ermöglicht uns personalisierte Online-Anzeigen und erweiterte Analysemöglichkeiten über Dein Nutzerverhalten. Dies beinhaltet auch den Zugriff und die Speicherung von Daten auf Deinem Gerät. Deine Einwilligung kannst Du jederzeit mit Wirkung für die Zukunft über den Menüpunkt „Cookie-Einstellungen“ widerrufen.
Über die Schaltfläche „Einstellungen ändern“ kannst Du individuelle Einwilligungen zu den Cookies/Tools erteilen, widerrufen und erhältst weitergehende Informationen zu den von uns eingesetzten Cookies/Tools, deren Zwecke und Laufzeiten.
Mit dem Klick auf „Nur unbedingt erforderlich“ werden nur technisch notwendige Cookies/Tools eingesetzt.

W naszej strefie Polityka prywatności dowiedzą się Państwo, jak przetwarzamy dane osobowe i do jakich celów wykorzystujemy przetwarzanie danych.

Proszę wybrać swoje ustawienia Cookie

Wiadomości PUSH od JBL

Jako część standardu W3C, powiadomienia Web definiują API dla powiadomień użytkowników końcowych, które są wysyłane za pośrednictwem przeglądarki na pulpit urządzeń stacjonarnych i/lub urządzeń mobilnych użytkowników. Powiadomienia pojawiają się na urządzeniach końcowych tak, jak jest to znane użytkownikowi końcowemu z aplikacji zainstalowanych na urządzeniu (np. wiadomości e-mail).

Powiadomienia te umożliwiają operatorowi witryny kontaktowanie się z jego użytkownikami tak długo, jak długo mają oni otwartą przeglądarkę - niezależnie od tego, czy użytkownik aktualnie odwiedza stronę internetową, czy nie.

Aby móc wysyłać powiadomienia web push, wystarczy tylko strona internetowa z zainstalowanym kodem web push. Tym samym także marki bez aplikacji mogą korzystać z wielu zalet powiadomień push (spersonalizowana komunikacja w czasie rzeczywistym dokładnie w odpowiednim momencie.)

Powiadomienia internetowe są częścią standardu W3C i definiują API dla powiadomień użytkowników końcowych. Powiadomienie umożliwia poinformowanie użytkownika poza kontekstem strony internetowej o wydarzeniu, jak na przykład nowy wpis na blogu.

Usługa ta jest udostępniona bezpłatnie przez firmę JBL GmbH & Co. KG, i można ją równie łatwo aktywować jak i dezaktywować.