Woda morska-Ta Woda

Salt and water = marine water?

Strictly speaking freshwater only differs from marine water by the sea salt content. Normally you can use your tap water and add a good sea salt. Check the salt content with a hydrometer ( JBL Gęstościomierz ) and add water or salt until the density has settled between 1.022 and 1.025. ALWAYS first add tap or osmosis water and then the salt – never the other way around!

Nitrate, Silicate, phosphate

If your tap water contains measurable amounts of phosphate, nitrate or silicate you need to use a reverse osmosis system.

Your tap water must NOT indicate any measurable content of copper! ( JBL Cu Miedź Test )

The start

As soon as your aquarium has the right salt content, the running-in phase will start. Inoculate your filter 24 h after the start with filter bacteria ( JBL Denitrol ). Now let the aquarium run with the substrate, saltwater, heater and filter for at least two weeks WITHOUT lighting. After this, turn on the lighting and increase the lighting time one hour every two weeks, until a maximum burn time of 10 hours has been reached.

After one week you can start to gradually add living reef stone (still without light!) There are several ways to create constructions in the marine aquarium. Firstly you can build a „foundation“ with e.g. porous rocks and place “living stones” on it. Or you can invest a little more money and build the complete reef with “living reef rocks”. We recommend the latter method because living stones promote the aquarium biology better than “dead” porous rocks.

The total running-in time is approx. 12 weeks! But during this time you can already admire a lot of beautiful and interesting creatures in your marine aquarium thanks to the living reef rocks you have added.

Uzdatnianie wody

Unfortunately the water conditioner JBL Biotopol is only partially suitable for marine water. It contains chelators which neutralise unwanted heavy metals, but unfortunately can cause your protein skimmer to overflow. As long as you do NOT run a skimmer you can use the water conditioner.

Parametry wody

In marine water the same water values are relevant as those you check in freshwater. See Parametry wody and Testy wody . Unlike in freshwater the measuring of the general hardness in marine water is not useful because the value is too high and your test vessel is more likely to overflow than indicate a value. The constituents of the general hardness (calcium & magnesium) are measured separately in marine water.

Pierwiastki śladowe

Along with calcium and magnesium many other trace elements in marine water are crucial for the care of corals! Your aquarium receives its first correct dosage of trace elements with the sea salt. It is therefore important to use a good sea salt. Ask your specialist dealer what sea salt they use and recommend. After a short time, depending on your invertebrates’ consumption, the trace elements will be used up. Not all uniformly and not all at the same time. After about one month it is time to re-dose your trace elements. Since not all trace elements can be mixed in one product (they would react with each other and not remain soluble), JBL can offer you several components under Siedlisko Woda morska which need to be added in short intervals. With them you provide for all the invertebrates and fish in your marine aquarium comprehensively and completely.

Calcium, magnesium, carbonate hardness: these 3 water values, together with the pH value, form the basis for healthy coral growth. You can find further information about these parameters here: Parametry wody .

Cookies, krótka informacja, potem będziemy kontynuować

Także strona internetowa JBL korzysta z kilku rodzajów Cookies, aby zapewnić Państwu pełną funkcjonalność i wiele usług: techniczne i funkcjonalne Cookies potrzebujemy bezwzględnie, żeby wszystko udało się podczas Państwa wizyty na tej stronie internetowej. Dodatkowo używamy Cookies do marketingu. I tak jest zapewnione, że podczas ponownej Państwa wizyty na naszej obszernej stronie rozpoznamy Państwa, będziemy mogli zmierzyć sukces naszych kampanii, oraz na podstawie spersonalizowanych Cookies będziemy mogli zwracać się do Państwa indywidualnie i bezpośrednio, w sposób dopasowany do Państwa potrzeb – także poza naszą stroną internetową. Mogą Państwo w każdej chwili – także w późniejszym terminie – określić, jakie Cookies Państwo dopuszczają a jakie nie (więcej na ten temat w „Zmiana ustawień“).

Także strona internetowa JBL korzysta z kilku rodzajów Cookies, aby zapewnić Państwu pełną funkcjonalność i wiele usług: Techniczne i funkcjonalne Cookies są potrzebne nam bezwzględnie, żeby wszystko udało się podczas Państwa wizyty na tej stronie internetowej. Dodatkowo używamy Cookies do marketingu. Mogą Państwo w każdej chwili – także w późniejszym terminie – określić, jakie Cookies Państwo dopuszczają a jakie nie (więcej na ten temat w „Zmiana ustawień“).

W naszej strefie Polityka prywatności dowiedzą się Państwo, jak przetwarzamy dane osobowe i do jakich celów wykorzystujemy przetwarzanie danych. dowiedzą się Państwo, jak przetwarzamy dane osobowe i do jakich celów wykorzystujemy przetwarzanie danych. Proszę potwierdzić za pomocą „Zapoznałam/-em się“ korzystanie ze wszystkich Cookies– i już można iść dalej.

Wiek ponad 16 lat? Proszę więc potwierdzić „Zapoznałem/am się“ odnośnie korzystania ze wszystkich Cookies– i już idziemy dalej.

Proszę wybrać swoje ustawienia Cookie

Techniczne i funkcjonalne Cookie, żeby wszystko udało się podczas Państwa wizyty na naszej stronie internetowej.
Marketingowe Cookies, abyśmy mogli rozpoznać Państwa na naszych stronach i zmierzyć sukces naszych kampanii.

PUSH-Nachrichten von JBL

Als Teil des W3C-Standards definieren Web-Benachrichtigungen eine API für Endbenutzer-Benachrichtigungen, die über den Browser Benachrichtigungen an die Desktop- und / oder Mobilgeräte der Nutzer gesendet werden. Auf den Endgeräten erscheinen Benachrichtigungen, wie sie der Endnutzer von auf dem Gerät installierten Apps kennt (bspw. E-Mails).

Diese Benachrichtigungen ermöglichen es einem Webseitenbetreiber seine Nutzer so lange zu kontaktieren, wie seine Nutzer einen Browser offen haben - ungeachtet dessen, ob der Nutzer gerade die Webseite besucht oder nicht.

Um Web-Push-Benachrichtigungen senden zu können, braucht man nur eine Website mit einem installierten Web-Push-Code. Damit können auch Marken ohne Apps viele Vorteile von Push-Benachrichtigungen nutzen (personalisierte Echtzeit-Kommunikationen genau im richtigen Moment.)

Web-Benachrichtigungen sind Teil des W3C-Standards und definieren eine API für Endbenutzer-Benachrichtigungen. Eine Benachrichtigung ermöglicht es, den Benutzer außerhalb des Kontexts einer Webseite über ein Ereignis, wie beispielsweise über eine neuen Blog Beitrag, zu benachrichtigen.

Diesen Service stellt die JBL GmbH & Co. KG kostenlos zur Verfügung, welcher genauso einfach aktiviert, wie deaktiviert werden kann.