Konstrukcja i dekoracja

Konstrukcja i dekoracja

Now let's put your ideas about a habitat into practice. The process will comprise five steps: the technical equipment, the side walls, the constructions, the substrate and the plants. And these need to be dealt with in exactly this order, since the technical items determine where cables or hoses need to be laid. Then follows the panelling of the side walls, as they strongly characterise the overall impression of your terrarium. You have an incredible number of options for the design of the side walls: cork panels, stones, stone replicas, styrofoam, styrodur, tree fern (Xaxim) - coconut fibre plates, or halved bamboo canes. Always use a non-toxic glue like JBL PROHARU UNIVERSAL or JBL AquaSil przezroczysty and avoid spaces that are inaccessible.

Further stone or wood constructions need to be stacked on each other securely enough that they cannot slip. Turtles or lizards can be very forceful! It is always safer to glue stone groups together so that you have a higher, immovable weight per group. However, if necessary, you should be able to lift the stone groups from each other to reach a hiding animal etc. Here again you should use a suitable adhesive, such as JBL PROHARU UNIVERSAL or JBL AquaSil czarny to let it dry for 24 hours.

Water section in the terrarium

If a water basin is to be installed it's best to do it before inserting the construction of stones or wood. For large basins, a drain tap with a hole at the bottom is a great help when it comes to maintenance. Ask a glazier to drill a hole (this can even be done later if necessary). This way you can drain and replenish the water through the drain tap without reaching into the terrarium. Likewise, a filter connection via TWO holes is possible.

Positioning of the lighting

Timely planning saves trouble at a later date.

The position of the spotlight also impacts the setup. Once you have attached the lighting and e.g. a JBL UV-Spot plus (Specjalna lampa do stosowania w hodowli gadów! Nie nadaje się do innych zastosowań! Nie jest wymagana etykieta EEK. Regulacja wyjątkowa zgodnie z (UE) 2019/2015 Załącznik IV 3. c) Promieniowanie UV > 2mW/klm) you can adjust the decoration and build climbing opportunities (as an example), so that your animals can retain their ideal distance to the UV spotlight ( JBL UV-Spot plus (Specjalna lampa do stosowania w hodowli gadów! Nie nadaje się do innych zastosowań! Nie jest wymagana etykieta EEK. Regulacja wyjątkowa zgodnie z (UE) 2019/2015 Załącznik IV 3. c) Promieniowanie UV > 2mW/klm) ) or the LUW spotlight ( JBL ReptilDesert L-U-W Light alu (Specjalna lampa do stosowania w hodowli gadów! Nie nadaje się do innych zastosowań! Nie jest wymagana etykieta EEK. Regulacja wyjątkowa zgodnie z (UE) 2019/2015 Załącznik IV 3. c) Promieniowanie UV > 2mW/klm) ).

The substrate

Last of all come the substrate and the planting. If you want to install caves which are easy to lift and clean, you can always use prefabricated plastic ones ( JBL ReptilCava SAND ). These are available in various sizes and colours.

Substrates for terrariums

An outline of all JBL substrates

The ground on which our terrarium animals move can vary hugely. Most animals have adapted perfectly to their natural habitat. That’s why the choice of the substrate is really crucial for the well-being of the animals. A "genuine" natural substrate is not always suitable for a terrarium. And anyway we don’t want to clear the rainforest out. So we often take a material that comes very close to the original, but is easily available and doesn’t rot.

Caves and hiding places

Most animals need caves and hiding places. You can build them yourself from stones and wood, or you can use ready-made caves ( JBL ReptilCava SAND ). These caves have the advantage that they can easily be lifted if you are looking for an animal or want to clean the cave.

Podłoże

Jaki powinien być rodzaj podłoża w terrarium? Jak grubą jego warstwę należy położyć?

Więcej

Cookies, krótka informacja, potem będziemy kontynuować

Także strona internetowa JBL korzysta z kilku rodzajów Cookies, aby zapewnić Państwu pełną funkcjonalność i wiele usług: techniczne i funkcjonalne Cookies potrzebujemy bezwzględnie, żeby wszystko udało się podczas Państwa wizyty na tej stronie internetowej. Dodatkowo używamy Cookies do marketingu. I tak jest zapewnione, że podczas ponownej Państwa wizyty na naszej obszernej stronie rozpoznamy Państwa, będziemy mogli zmierzyć sukces naszych kampanii, oraz na podstawie spersonalizowanych Cookies będziemy mogli zwracać się do Państwa indywidualnie i bezpośrednio, w sposób dopasowany do Państwa potrzeb – także poza naszą stroną internetową. Mogą Państwo w każdej chwili – także w późniejszym terminie – określić, jakie Cookies Państwo dopuszczają a jakie nie (więcej na ten temat w „Zmiana ustawień“).

Także strona internetowa JBL korzysta z kilku rodzajów Cookies, aby zapewnić Państwu pełną funkcjonalność i wiele usług: Techniczne i funkcjonalne Cookies są potrzebne nam bezwzględnie, żeby wszystko udało się podczas Państwa wizyty na tej stronie internetowej. Dodatkowo używamy Cookies do marketingu. Mogą Państwo w każdej chwili – także w późniejszym terminie – określić, jakie Cookies Państwo dopuszczają a jakie nie (więcej na ten temat w „Zmiana ustawień“).

W naszej strefie Polityka prywatności dowiedzą się Państwo, jak przetwarzamy dane osobowe i do jakich celów wykorzystujemy przetwarzanie danych. dowiedzą się Państwo, jak przetwarzamy dane osobowe i do jakich celów wykorzystujemy przetwarzanie danych. Proszę potwierdzić za pomocą „Zapoznałam/-em się“ korzystanie ze wszystkich Cookies– i już można iść dalej.

Wiek ponad 16 lat? Proszę więc potwierdzić „Zapoznałem/am się“ odnośnie korzystania ze wszystkich Cookies– i już idziemy dalej.

Proszę wybrać swoje ustawienia Cookie

Techniczne i funkcjonalne Cookie, żeby wszystko udało się podczas Państwa wizyty na naszej stronie internetowej.
Marketingowe Cookies, abyśmy mogli rozpoznać Państwa na naszych stronach i zmierzyć sukces naszych kampanii.

PUSH-Nachrichten von JBL

Als Teil des W3C-Standards definieren Web-Benachrichtigungen eine API für Endbenutzer-Benachrichtigungen, die über den Browser Benachrichtigungen an die Desktop- und / oder Mobilgeräte der Nutzer gesendet werden. Auf den Endgeräten erscheinen Benachrichtigungen, wie sie der Endnutzer von auf dem Gerät installierten Apps kennt (bspw. E-Mails).

Diese Benachrichtigungen ermöglichen es einem Webseitenbetreiber seine Nutzer so lange zu kontaktieren, wie seine Nutzer einen Browser offen haben - ungeachtet dessen, ob der Nutzer gerade die Webseite besucht oder nicht.

Um Web-Push-Benachrichtigungen senden zu können, braucht man nur eine Website mit einem installierten Web-Push-Code. Damit können auch Marken ohne Apps viele Vorteile von Push-Benachrichtigungen nutzen (personalisierte Echtzeit-Kommunikationen genau im richtigen Moment.)

Web-Benachrichtigungen sind Teil des W3C-Standards und definieren eine API für Endbenutzer-Benachrichtigungen. Eine Benachrichtigung ermöglicht es, den Benutzer außerhalb des Kontexts einer Webseite über ein Ereignis, wie beispielsweise über eine neuen Blog Beitrag, zu benachrichtigen.

Diesen Service stellt die JBL GmbH & Co. KG kostenlos zur Verfügung, welcher genauso einfach aktiviert, wie deaktiviert werden kann.