Name: JBL PROAQUATEST SiO2 OPAK.UZUP.
Brand: JBL
SKU: 2411900
Price: 8.12 EUR
Availability: InStock
Rating: 5 (3 reviews)

Zdrowe akwarium z niemal naturalnymi warunkami
Właściwe parametry wody w akwarium zależą od obsady ryb i roślin. Także jeżeli woda wygląda jak przezroczysta, może być zanieczyszczona. Przy złych wartościach mogą tworzyć się choroby lub glony w akwarium. Dla zdrowego akwarium z niemal naturalnymi warunkami ważna jest regularna kontrola i dostosowanie parametrów wody.

Do każdej analizy wody firma JBL oferuje testy wody w postaci szybkich testów lub testów ze zmianą kolorów. Określają one jedną konkretną wartość lub kilka wartości jednocześnie. Dzięki tym testom wody można rozpoznać problemy z glonami i ustalić niekorzystne wartości azotanów, azotynów, potasu, magnezu etc.

Dlaczego testować?
Krzem jest jednym z najczęściej występujących pierwiastków na Ziemi. Podczas wietrzenia skał krzemianowych krzem dostaje się w postaci krzemianu do wód powierzchniowych i gruntowych. Dlatego woda wodociągowa zależnie od rodzaju podłoża danego regionu zawiera różną zawartość rozpuszczonego krzemianu. Krzem ma znaczenie dla akwarystyki i stawu ogrodowego jako składnik pokarmowy dla okrzemek, niektórych roślin wodnych oraz kolonii gąbek krzemionkowych i niektórych innych bezkręgowców.

JBL Online-laboratorium
Regularna kontrola dla zdrowego akwarium z niemal naturalnymi warunkami. Proszę wprowadzić w JBL Online-laboratorium swoje parametry wody i w kilka sekund przeprowadzić solidną analizę swoich wartości.

Zalecane wartości krzemianów:
Akwarium słodkowodne (akwarium wielogatunkowe): 0-2,0 mg/l
Akwarium Jeziora Malawi-/Tanganika: Ponieważ gatunki ryb zjadające porosty chętnie jedzą okrzemki, zawartość krzemianów nie odgrywa tu żadnej roli. Bez ryb zjadających porosty wartość powinna wynosić 0-2,0 mg/l
Akwaria z roślinnością z małą liczbą ryb (Aquascaping): 0-2,0 mg/l
Akwaria morskie: 0-1,0 mg/l
Stawy ogrodowe: 0-2,0 mg/l

Unequal consumption of individual water test reagents

The liquids of one reagent are empty, the powder is still half-filled. Can't you just buy individual bottles? No, because the JBL refill packs always contain all the reagents as a set and need to be replaced together. There is a reason for this. The reagents age when they are first opened and should therefore be disposed of completely as soon as one of the reagent bottles is empty. The unequal consumption is due to the fact that some test procedures require an individual number of drops, depending on the existing value in the aquarium water. So one needs more, the other less. The liquids can be emptied completely. In the case of powder, you cannot use the quantity you need if there is only a residual amount left. Thus the quantity is on the generous side, so that the range is ensured even with low liquid consumption.

Where can I find the record sheets for the documentation of my water analysis?

Have you lost your record sheets, used them all up, or need them in another language?
In the appendix of this FAQ you will find PDF files for printing them out in German, English and French.

9789500 V05 PROAQUATEST Wasseranlayse PREVIEW.pdf

Why are there different recommendations and values on the colour chart of the water test?

With the JBL PROAQUATEST drop tests you have a laboratory comparator system which compensates the inherent colouration of the water and at the same time enables non-chemists to carry out an accurate and safe water analysis. To ensure that water testing monitors the life of your fish and provides the greatest possible safety, you will find an evaluation adaptable to three different applications.

Above the different coloured measuring points are numbers, three symbols and a colour band for each.

The symbols stand for the following applications:
Fish = freshwater
Koi = garden pond
Starfish = marine water

The colour band tells you the meaning of the value determined in green (everything OK), yellow (attention) and red (need for action). In addition you will find numbers that reflect the value in mg/l for the respective colour field.

The first two (freshwater and pond) colour bands belong to the upper number row. Marine water belongs to the lower number row.

Why do the values differ?
Due to the high salt concentration in marine water, the colouring of the reaction is not as intense as in freshwater (which also includes pond). Consequently, the value for the same colouration is greater than in freshwater

Why do the recommendations differ?
Every habitat reacts differently to certain nutrient concentrations. In the garden pond, for example, constantly changing temperatures and light intensity can jeopardise the value more than in freshwater, where, unlike in the pond, these factors are constant and necessary additives are supplied. That’s why the recommendations are green for one area of application, yet yellow for the other.

I have lost my colour chart. Can I download the colour chart for the test?

The colour cards are not available for download on the JBL website. The absolutely accurate colour reproduction that is required can only be achieved using a printer which can be re-calibrated before each printout. Most privately used printers are not accurate enough for this.

You will find the colour chart bundle as a spare part on the respective product page and in the spare parts shop under: https://www.jbl.de/en/products/detail/8732/jbl-proaquatest-assortiment-color-chart

The instructions point out that the comparator block should be used to compare the colours. Can this be done without the comparator block as well ? Or is there a factor from this comparison that is required for the measurement ?

The colour charts are intended to be used with the comparator block. In addition, when the comparator block is used with the blank water sample, this compensates the inherent water colour.

Therefore, if the comparator block is not used, there will most likely be deviations in the readings.

Pokaż więcej FAQs ...

What can I do when the measured value of a water test falls outside the scale?

If one of your measurements reaches the end of the colour chart scale you can multiply the scale by diluting later tests with distilled water (e.g. JBL Dest).

Here’s how to do it: dilute the sample with distilled water and carry out the test once more.

This works in detail as follows:
GH test: Instead of 5 ml use 10 ml aquarium water. Now 1 drop is equivalent to 0.5 dGH.
KH test: Instead of 5 ml use 10 ml aquarium water. Now 1 drop is equivalent to 0.5 dGH.

Note: when using 10 ml sample water the colour development is weaker with the first drops than with 5 ml sample water. Put the measuring container on a white underlay for a better readability.

NH4/NH3 ammonium/ammonia, NO2 nitrite, Fe iron and Cu copper:
2.5 ml sample + 2.5 ml dist. water: result times 2
1 ml sample + 4 ml dist. water: result times 5
0.5 ml sample + 4.5 ml dist. water: result times 10

NO3 nitrate, SiO2 silicate, PO4 phosphate sensitive and Mg magnesium freshwater:
5 ml sample + 5 ml dist. water: result x 2
2 ml sample + 8 ml dist. water: result x 5
1 ml sample + 9 ml dist. water: result x 10

PO4 phosphate koi high range:
2.5 ml sample + 2.5 ml dist. water: result x 2
1 ml sample + 4 ml dist. water: result x 5

K potassium:
7.5 ml sample + 7.5 ml dist. water: result x 2
3 ml sample + 12 ml dist. water: result x 5
1.5 ml sample + 13.5 ml dist. water: result x 10

K potassium in marine water:
1. Fill 10 ml of sample water with distilled water to 300 ml.
2. Follow the instructions for fresh water.
3. Multiply the test result by a factor of 30.

CO2 direct, Ca calcium and Mg+Ca magnesium+calcium: not required.

Do my water tests still work although they have been open for nine months?

Basically a sealed test keeps longer than an open one. How much the shelf life is reduced depends crucially on the handling and the storage conditions of the reagents. It may happen that a reagent in a test that has been open for 9 months doesn’t indicate correctly any more. However, additional information is needed to answer this question properly.

The silicate concentration does not decrease after JBL SilikatEx (rapid) is used. The silicate test always shows a deep-blue to black colouration, which indicates more than 6 mg/l of silicate.

A reading of > 6 mg/l with the silicate test means that there are more than 6 mg/l of silicate in the water. It is not possible to check how many more silicates are present. There may be 10, 50 or even more mg/l of silicates. There are more than 40 mg/l in tap waters in many regions today. The respective water supplier can provide more detailed information or you can dilute the water to be measured with silicate-free water e.g. water that has been distilled twice prior to measuring. In the event that osmosis water is supposed to be used, its silicate content should also be measured. With 40 mg/l of silicates in the starting water JBL Osmose 120 is able to achieve a permeate with 0.4 – 1.2 mg/l of silicate.

Therefore, with silicate values this high, the lowering effect of JBL SilikatEx can only be checked by diluting the water before measuring it.

500 g JBL SilikatEx binds 5000 mg silicate out of the water.
400 g JBL SilikatEx Rapid binds approx. 12000 mg silicate out of the water.

Sample calculation:

100 l tank with 50 mg/l of silicate in the starting water:

100 l x 50 mg/l = 5,000 mg of silicate.

JBL TV #53 How do you carry out water tests correctly and what are the most common mistakes?

Water tests for aquarium water can be very important, especially when there are problems.

Gatunek zwierzęcia:	Aksolotl, Arowana, Bojowniki, Brzanki, Błędnikowce, Danio, Dyskowce, Długonosowate, Flowerhorn, Gourami, Gupik, Karasie złociste, Karpieńcokształtne, Kiryski, Koralowce, Kraby, Krewetki Macrobrachium, Krewetki karłowate, Kąsaczowate, Małże, Motylowce, Młode ryby, Nurkowanie za żerem, Pielęgnice (Ameryka Południowa), Pielęgnice papuzie, Piskorzowate, Platany szponiaste, Prętniki, Raczki karłowate, Raczki skrzelowe, Rozdymkowate, Skorupiaki, Sumowate, Szczupieńczykowate, Traszki, Tropikalny żółw błotny, Tęczankowate, Welony, Wielopłetwcowate / Trzcinniki, Ślimaki, Żyworodne, Żółwie błotne, Żółwie wodne
Wielkość zwierzęcia:	Dla wszystkich wielkości zwierząt
Grupa wiekowa zwierząt:	Wszystkie ryby akwariowe
Materiał:	Odczynnik(-i) w butelce(-kach) z tworzywa sztucznego i/lub ze szkła + osprzęt z tworzywa sztucznego i/lub szkła. OPAKOWANIE UZUPEŁNIAJĄCE: Odczynnik(-i) bez osprzętu.
Kolor:	biały / przezroczysty / czarny
Dozowanie:	Patrz Instrukcja użycia

Rtęć:	Nie
Możliwość ściemniania:	Nie

Wysokość:	175 mm
Długość:	106 mm
Szerokość:	43 mm

Rtęć:	Nie
Możliwość ściemniania:	Nie

Wysokość:	64 mm
Długość:	72 mm
Szerokość:	24 mm

Produkty & Shop

JBL PROAQUATEST SiO2 Krzemiany Szybki test do określenia zawartości krzemianów w akwariach słodkowodnych & morskich

To mogłyby także Panią/Pana zainteresować

PROAQUATEST LAB

PROAQUATEST LAB PROSCAPE

PROAQUATEST LAB Marin

PROAQUATEST pH 3.0-10.0

PROAQUATEST pH 6.0-7.6

PROAQUATEST pH 7.4-9.0

PROAQUATEST GH Twardość całkowita

PROAQUATEST KH Twardość węglanowa

PROAQUATEST O2 Tlen

PROAQUATEST Cu Miedź

PROAQUATEST Fe Żelazo

PROAQUATEST NH4 Amon

PROAQUATEST NO2 Azotyny

PROAQUATEST NO3 Azotany

PROAQUATEST PO4 Fosforany Sensitive

PROAQUATEST K Potas

PROAQUATEST Ca Wapń

PROAQUATEST Mg-Ca Magnez-Wapń

PROAQUATEST CO2-pH Permanent

PROAQUATEST CO2 Direct

PROAQUATEST Mg Magnez Woda słodka

JBL PROAQUATEST SiO2 Krzemiany

Właściwości

Etykieta elektroniczna / Żarówki

Dane techniczne

JBL PROAQUATEST SiO2 OPAK.UZUP.

Właściwości

Etykieta elektroniczna / Żarówki

Dane techniczne

JBL TV #53 How do you carry out water tests correctly and what are the most common mistakes?

JBL TV #52 What kind of water do my aquarium fish need? What water values are ideal?

JBL PROAQUATEST - simple yet laboratory standard - Part II

JBL TV #45: Optimum water values in the freshwater aquarium - 15 parameters explained simply

Special case diatoms - What’s important?

JBL water tests - how to test correctly and reap the benefits

JBL TV #27: Testing aquarium water - this is how it works

Misunderstandings – typical beginner mistakes

Time For A Change - Pros And Cons

How often do you need to test your pond or aquarium water?

Testing Water in the Jungle

Outline: Fertilisation in the Aquarium

Laboratory Comparator System to Compensate the Intrinsic Colour of the Water

Care products - The best solutions for your aquarium

Inaccurate water tests – or did I do something wrong after all?

Testing water – here’s how

Keeping an eye on the most important water values

Water values for water plants in detail

JBL has the largest range of water tests worldwide!

JBL Water Tests Now Even Better

Testy wody

Test wody - wszystkie parametry

Rodzaje glonów

Woda morska

Obniżanie problematycznych parametrów wody

Choroby

Niedobory

Zwalczanie glonów

Woda morska Pielęgnacja

Testy wody

Hodowla ryb akwariowych

Testy wody

Parametry wody

Rośliny

CO2 Nawożenie roślin

Akwarium morskie

Typy akwariów biotopowych (środowiskowych)

Typ akwarium aquascaping JBL DreamScape®

Typ akwarium z dżunglą JBL Rio Pantanal®

Typ akwarium dla karasi złocistych JBL Goldfish Paradise®

Typ akwarium z rafą koralową JBL Malawi Rocks®

Woda deszczowa

Właściwy materiał filtracyjny

Woda morska-Ta Woda

Gatunki roślin

Codzienna pielęgnacja

Pielęgnacja roślin

Materiał filtracyjny jako rozwiązanie problemów

JBL PROAQUATEST SiO2 Krzemiany
Szybki test do określenia zawartości krzemianów w akwariach słodkowodnych & morskich